Tips for Increasing the Life of your Projector Lamp

A projector lamp, like any other light bulb, has a lifespan. The amount of hours your projector lamp lasts is determined by how often you use it and the projector brand. The light life for most projector lamp is between 1500 and 2000 hours. Here are eight suggestions for extending the life of your projector lamp.

Follow these guidelines to extend the life of your projector lamp

1. Keep an eye on the dust

The optimal atmosphere for your projector is reasonably dust-free. Make sure your projector lamp isn't near any open windows, as this will expose it to dust and pollen from the outside.

2. Avoid switching on and off frequently

 When you turn on the projector lamp, a power spike occurs, putting strain on the light's connections. Avoid frequent switching on and off by turning on your projector just when you're ready to use it.

3. Check the temperature

Overheating a projector puts strain on the light, which might cause it to explode. Check for enough ventilation around the projector, especially if it is permanently placed. The fan vent should never be blocked by the mounting plates.

4. Take a break from it

Don't leave the projector lamp on all the time. Every 24 hours, turn it off and leave it alone for at least one hour. Longer projector lamp life can be achieved by using the projector for four to five hours per day on average.

5. Allow time for it to cool 

Cooling fan in your projector stops the projector lighting from overheating. Before shutting off the projector, let the projector fan complete its cycle and shut down. The projector lamp can shatter if the off switch is pressed before the projector lamp has cooled.

6. Keep it tidy

Your projector's air filters are meant to keep air circulating and prevent it from overheating. Keep them dust-free and debris-free. Clean the air filters at least once every three months, or more frequently if there is a lot of dust. The life of the projector light can be extended with regular maintenance.

7. Go green

Some projectors offer an "Eco mode" or "Bulb Economy Mode" that reduces the brightness of the projector lamp by 20% while increasing the lamp life by 50%. Likely, you won't even notice the reduction. The lamp mode on most projectors is set to maximum brightness by default, so you'll have to alter it manually.

8. Set up genuine lighting

Generic lamps may appear to be a good deal, but their lamp life is significantly reduced. These counterfeit bulbs, which are labeled as "compatible," are prone to exploding. Genuine OEM projector lamps have a substantially longer light life than generic projector bulbs. Be careful of imitation projector bulbs.

If you have any other queries related to projector lamps or confused how to choose projector, then let us know in the comment section. Here is a bonus tips to turn your garden into cinema with projector!